Barksavon
|
| posted on 22/9/10 at 07:57 PM |
|
|
Oversize Pinto Bores
This may sound like a stupid question......will standard piston rings be ok in a bore thats been opened out to + 0.5mm, what would potential problems
be...
|
|
|
|
|
big_wasa
|
| posted on 22/9/10 at 07:59 PM |
|
|
piston slap and poor compresion for starters.
|
|
|
omega0684
|
| posted on 22/9/10 at 08:06 PM |
|
|
simple answer, no they won't
if your going for a rebore, do it properly, 93mm! 
I love Pinto's, even if i did get mine from P&O!
|
|
|
jacko
|
| posted on 22/9/10 at 08:10 PM |
|
|
NO sorry 
|
|
|
DRC INDY 7
|
| posted on 22/9/10 at 08:29 PM |
|
|
Correct it is a stupid question the pistons and rings are too small for the bore and would be a poor seal
https://www.facebook.com/groups/462610273778799/
Puddle Dodgers Club
|
|
|
