keith777
|
| posted on 9/11/10 at 10:22 PM |
|
|
rocker cover
Just a quickie guys,before I commit myself to another evil bay purchase,will a rocker cover off a 1.6 165 pinto block fit a 2.0 non 205 pinto block ?
Thanking you all again Keith
|
|
|
|
|
owelly
|
| posted on 9/11/10 at 10:28 PM |
|
|
You'd be better off try to attach it to the cylinder head rather than the block.......
http://www.ppcmag.co.uk
|
|
|
keith777
|
 posted on 9/11/10 at 10:33 PM |
|
|
Thank you !(there's always one)
|
|
|
RichardK
|
| posted on 9/11/10 at 10:39 PM |
|
|
I'd say yes
Gallery updated 11/01/2011
|
|
|
keith777
|
| posted on 9/11/10 at 11:05 PM |
|
|
Took a chance and bought it.Thanks again guys
|
|
|
omega0684
|
| posted on 10/11/10 at 12:13 AM |
|
|
yes it should fit
I love Pinto's, even if i did get mine from P&O!
|
|
|
Peteff
|
| posted on 10/11/10 at 10:57 AM |
|
|
There are two different types of rocker cover independent of engine size as they use different rocker gaskets so even if it was a 2 litre it could be
the wrong type. Hopefully it will be the correct one for you though.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
RAYLEE29
|
| posted on 10/11/10 at 03:12 PM |
|
|
hi, early ones thin gasket late ones wide gasket.
should be able to fit late cover and gasket to early head but dont think older ones fit newer heads
Ray
|
|
|
