Tiger Super Six
|
| posted on 3/12/10 at 10:29 AM |
|
|
Removing EGR from Inlet side - Duratec
Hi,
Probably another silly question!
I have stripped the Duratec down and coming out of the inlet side there is a short metal pipe to do with the EGR which used to go into the original
Ford induction system. I thought that it would just unscrew as their is a nut on it but if you undo the nut it just comes off over the pipe but the
pipe is still fixed solid.
How do you remove the pipe part?
Thanks in advance,
Mark.
Mark
Tiger Avon
|
|
|
|
|
redeye
|
| posted on 3/12/10 at 10:34 AM |
|
|
PULL
pull like you've never pulled before 
It will come out, no tricks just put yer back into it
|
|
|
Tiger Super Six
|
| posted on 3/12/10 at 10:42 AM |
|
|
I clearly have an issue with pulling things, the injectors needed pulling out and now this! I always assume things are fixed in!
Any tips on pulling i.e. tools to use etc?
Mark
Tiger Avon
|
|
|
flak monkey
|
| posted on 3/12/10 at 11:05 AM |
|
|
Tap it sideways with a hammer, its on a compression fitting.
Should come out easy.
Sera
http://www.motosera.com
|
|
|
RazMan
|
| posted on 3/12/10 at 11:33 AM |
|
|
Tap tug tap tug ... heave!
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
Tiger Super Six
|
| posted on 3/12/10 at 12:41 PM |
|
|
Cheers chaps, should warm me in a cold garage!
Mark
Tiger Avon
|
|
|
