Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: nylon fuel pipe
blakep82

posted on 12/12/10 at 12:51 AM Reply With Quote
nylon fuel pipe

I'm planning on running nylon (or is there any other better plastic fuel pipe?) between my tank and pump, then from the pump to carbs. between each join, ie between the tank and pipe, then between the pipe and pump etc, i'll use braided rubber hose.

does the nylon pipe need any fittings on the end before the rubber hose? like any sort of barb? or does the rubber just push over the nylon pipe, then clamp down with a fuel pipe clip?





________________________

IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083

don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!

View User's Profile View All Posts By User U2U Member
snapper

posted on 12/12/10 at 05:35 AM Reply With Quote
You will need some off the barbed nylon joiners or when you tighten the clamps the pipe will just collapse.
You will also need a spec sheet for the nylon pipe from the supplier for IVA.
Robin Hoods have used nylon for many years, works well but the IVA documentation has been a known problem for many years.





I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)

View User's Profile View All Posts By User U2U Member
adithorp

posted on 12/12/10 at 08:33 AM Reply With Quote
You'll need documentation for the nylon and the braided rubber or the correct marking has to be on the pipe/hose.





"A witty saying proves nothing" Voltaire

http://jpsc.org.uk/forum/

View User's Profile View All Posts By User U2U Member
designer

posted on 12/12/10 at 09:19 AM Reply With Quote
It's easier to use a solid line for the long runs with flexible ends and, as said, nylon lines can be confusing regarding certification.

Note - be sure to use the proper fuel clips when connecting flexible to solid.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
blakep82

posted on 12/12/10 at 01:11 PM Reply With Quote
so do you get metal strengtheners that go in the pipe before clamping down on it? anyone got any photos?





________________________

IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083

don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!

View User's Profile View All Posts By User U2U Member
snapper

posted on 12/12/10 at 03:37 PM Reply With Quote
CBS do metal and nylon joiners





I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.