Hammy360
|
| posted on 30/1/11 at 09:42 PM |
|
|
MT75 TO ZETEC
I have an mt75 that i want to marry up to a zetec, what does it involve and what parts do i need?
|
|
|
|
|
snapper
|
| posted on 30/1/11 at 09:52 PM |
|
|
Zetec has the correct bolt pattern, clutch has the right splines, should fit straight on but might need some webs ground off of the sump to fit the
starter
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
JAMSTER
|
| posted on 30/1/11 at 09:56 PM |
|
|
early mondeo clutch 1.8 flywheel .2.0 dohc or 1.8 cvh starter motor and thrust bearing with a spacer like this
http://www.westfield-sportscars.co.uk/shop/product.asp?P_ID=254&strPageHistory=search&strKeywords=mt75&numPageStartPosition=1&strSearc
hCriteria=any&PT_ID=all
[Edited on 30/1/11 by JAMSTER]
|
|
|
Hammy360
|
| posted on 14/2/11 at 10:09 PM |
|
|
thanks guys, is the sump going to have to be modified to go in a GBS zero?
|
|
|
