lotusmadandy
|
| posted on 14/3/11 at 02:03 PM |
|
|
zetec clutch part no.
Hi all,
Does anyone have the part nos for the correct clutch plate and cover for a zetec.
The ones we use when fitting to a type 9 box. It is for the 1.8 flywheel.
I had the info saved but have lost it.
Cheers,
Andy
|
|
|
|
|
austin man
|
| posted on 14/3/11 at 02:12 PM |
|
|
Im using the standard 1.8 zetec on with the Capri release bearing, i did run with the standard release bearing but read that the travel of the bearing
would be too short after a time resulting in loss of clutch, whilst there would still be plenty of meat on the clutch plate
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
|
lotusmadandy
|
| posted on 14/3/11 at 02:16 PM |
|
|
Yes i already have this set up in my mk.a friend wants to order the
parts for his build but needs the part no's.
I did keep the no for future reference but have lost them.
Andy
|
|
|
austin man
|
| posted on 14/3/11 at 02:29 PM |
|
|
ct133 is the bearing number
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
|
coozer
|
| posted on 14/3/11 at 02:58 PM |
|
|
FORD MONDEO MK1 1.6 & 1.8 / MONDEO MK2 1.8 CLUTCH KIT on eBay (end time 01-Apr-11 23:21:02 BST)
1972 V8 Jago
1980 Z750
|
|
|
Norfolkluegojnr
|
| posted on 14/3/11 at 03:03 PM |
|
|
QH part number of mine was QKT690AF. If you bang that into google, loads of suppliers will pop up . 
|
|
|
lotusmadandy
|
| posted on 14/3/11 at 03:13 PM |
|
|
Thank you gentlemen.
Andy
|
|
|
big_wasa
|
| posted on 14/3/11 at 06:06 PM |
|
|
Important bit is the THE DIAMETER IS 220MM WITH 1" 23 SPLINE centre.
FORD MONDEO MK1 1.6i 1.8i 94-96 NEW CLUTCH KIT on eBay (end time 12-Apr-11 12:55:13 BST) is £30 posted to your door
|
|
|
lotusmadandy
|
| posted on 15/3/11 at 01:23 PM |
|
|
As always this forum is the best.
Thanks for all the replies/advice and for pointing me in
the proper direction
Andy
|
|
|
.jpg)
