daniel mason
|
| posted on 16/3/11 at 09:05 PM |
|
|
where or how do i install a radiator fan switch?
after looking through the s2000 workshop manual i have realised that i have somehow missed out the radiator fan switch when plumbing in the cooling
circuit! i have a pro alloy rad with no boss for a switch,so where do i put it into the circuit? cheers.dan!
|
|
|
|
|
pewe
|
| posted on 16/3/11 at 09:14 PM |
|
|
CBS do an In-line water temp sender housing, their ref #INT 25- 32-38 about £15.
HTH. Cheers, Pewe 
|
|
|
prawnabie
|
| posted on 16/3/11 at 09:19 PM |
|
|
What size is your top hose, I have a digital adjustable revotec one you can have for p+p if it is suitable.
|
|
|
daniel mason
|
| posted on 16/3/11 at 09:27 PM |
|
|
my rad outlets are 38mm but i bought 2x silicone reducers from 38-32mm and 2x 32mm alloy hose joiners! hope this helps
[Edited on 16/3/11 by daniel mason]
|
|
|
blakep82
|
| posted on 17/3/11 at 12:34 PM |
|
|
get a threaded boss from rakeway welded into that aluminium pipe 
www.rakeway.co.uk
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
