big-vee-twin
|
| posted on 10/4/11 at 11:02 AM |
|
|
Sierra Diff/Prop shaft Torque
Hi All,
Little guidance please.
Can't find the recommended torque value for the Prop shaft to diff flange bolts, my manual has that section missing.
Can someone please confirm torque value and do I need Nylocnuts on the back or just spring washers under the bolt head or neither and just Locktite on
the threads?
Many thanks 
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
|
|
coozer
|
| posted on 10/4/11 at 11:20 AM |
|
|
Ford standard is nylok on the threads.
1972 V8 Jago
1980 Z750
|
|
|
Davg
|
| posted on 10/4/11 at 12:24 PM |
|
|
Torque settings 57 - 75Nm (42 -55 Lbf ft)
cheers D
|
|
|
big-vee-twin
|
| posted on 10/4/11 at 01:21 PM |
|
|
Thank you both.
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
