rich201283
|
| posted on 10/4/11 at 04:31 PM |
|
|
Fiesta brake master cylinder?
I have a brake master cylinder off a fiesta, it has 4 ports, 2 are m10 and the other 2 are smaller, i have connected the front brakes pipes up to the
fron ports and use 1 of the back ports for the rear and blanked the other up.
If i have use 1 small port on the front and a larger port on the from will it brake ok?
|
|
|
|
|
adithorp
|
| posted on 10/4/11 at 05:33 PM |
|
|
Yes, it'll be fine.
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
omega 24 v6
|
| posted on 10/4/11 at 05:44 PM |
|
|
See my post
My master cyl
Is this one the same as yours?? the ports are different sizes but they are 2 x 12mm and 2 x 10mm
If it looks wrong it probably is wrong.
|
|
|
matty h
|
| posted on 10/4/11 at 05:48 PM |
|
|
Why not fit the brake switch in the spare one.
|
|
|
