nickw2000
|
| posted on 20/4/11 at 08:26 AM |
|
|
Oil cap breather???
My oil filler cap has a breather from it, not a tube type just breaths from the side but on long journeys leaks oil from the top and down the engine
rocker cover, can I block these holes off? I have a oil breather with a can attached but thought the oil filler cap was sealed but found out it
breaths
|
|
|
|
|
snapper
|
| posted on 20/4/11 at 10:49 AM |
|
|
As long as the rocker covers has a breather tube it should be fine to block the holes.
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
chrisbeale
|
| posted on 20/4/11 at 06:01 PM |
|
|
i have 3 breathers in mine, one from the sump up and two out to a catch tank, it does breath quite heavily though, prob not the best of things.
i would be against you just letting it breath out to air though, put a catch tank in then us motorcyclisty people wont have nasty little slips 
|
|
|
nickw2000
|
| posted on 21/4/11 at 06:31 AM |
|
|
I'm struggling to find a cap for a pinto engine, that has a breather pipe attachment,
Any one know if a transit 2.4 91 ish year will fit?
|
|
|
jacko
|
| posted on 21/4/11 at 02:44 PM |
|
|
What engine do you have ?
|
|
|
nickw2000
|
| posted on 21/4/11 at 02:52 PM |
|
|
Ohc 2.0 pinto
|
|
|
jacko
|
| posted on 21/4/11 at 03:05 PM |
|
|
quote:
Originally posted by nickw2000
Ohc 2.0 pinto
Well its up to you but i have had my rocker breather its been blocked for about 2 years
the sump breather goes to a catch tank [ NO ONE WAY VALVE FITTED IN THE SUMP BREATHER ]
Jacko
|
|
|
