TheGiantTribble
|
| posted on 26/5/11 at 06:00 PM |
|
|
Trouble with transaxle
Ok I admit, I'm hoping for a miracle.
I have got a UN1 transaxle...horay, with a Rover V8 bellhousing...even more of a horay
which we are hoping to fit into a single seater Formula Junior/One look alike track blat mobile 
However, it's input shaft is jammed, selects gears fine, drive shafts turn in oposite directions when you twiddle them...so other then stripping
the whole thing down (her in doors aint going to like the oil, she don't don't like the box sitting in the middle of the floor as it is)
does any one reading this have an easy answer
You know the run round it three times, kick the cat, and hit it just about there, and it'll all free up type of answer.
Thanks in advance
|
|
|
|
|
britishtrident
|
| posted on 26/5/11 at 06:30 PM |
|
|
Sounds like it could be in 2 gears at the same time.
|
|
|
otodb
|
| posted on 26/5/11 at 06:36 PM |
|
|
Hi, You could give Chris Cole a call & chat the problem through with him, he specialises in UN1 gearboxes. I've found him very helpfull. His
phone number is - 01952-416051. He is based in Telford.
All the best,
Brian.
|
|
|
