franky
|
| posted on 19/6/11 at 08:50 PM |
|
|
who to weld a ally sump?
Of the cast type, anyone around Notts/lincs/derby able to weld a cast ally sump for me. i've a very small crack, its not got to be pretty,
just functional
|
|
|
|
|
femster87
|
| posted on 19/6/11 at 08:57 PM |
|
|
mkengineering
|
|
|
franky
|
| posted on 19/6/11 at 08:58 PM |
|
|
is he close?
|
|
|
Strontium Dog
|
| posted on 19/6/11 at 09:03 PM |
|
|
If you don't mind posting it I can do it for you!
|
|
|
femster87
|
| posted on 19/6/11 at 09:03 PM |
|
|
35 miles from me. but would be further from you.
|
|
|
AndyW
|
| posted on 19/6/11 at 09:05 PM |
|
|
quote:
Originally posted by Strontium Dog
If you don't mind posting it I can do it for you!
I can highly recommend his work. he did my sump and it looks absolutley great. You cant go wrong with Si!!!
|
|
|
Mark Allanson
|
| posted on 19/6/11 at 09:19 PM |
|
|
"i've a very small crack, its not got to be pretty, just functional"
LOL is a very over used term, but on this occasion....
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
Peteff
|
| posted on 19/6/11 at 09:42 PM |
|
|
Get some epoxy resin, it will be cheaper unless someone is doing it for free.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
Chippy
|
| posted on 19/6/11 at 10:25 PM |
|
|
I used this and it has proved to be great. HTH Ray
JB WELD WORLDS FINEST COLD WELD (2 X 28.4G) | eBay UK
To make a car go faster, just add lightness. Colin Chapman - OR - fit a bigger engine. Chippy
|
|
|
franky
|
| posted on 20/6/11 at 06:37 AM |
|
|
quote:
Originally posted by Mark Allanson
"i've a very small crack, its not got to be pretty, just functional"
LOL is a very over used term, but on this occasion....
Its a bit of a dirty crack too
I don't want to post as it'll only add to the cost. I've tried some metal putty but it seems to weap still. What is the best sort
of instant stuff going?
|
|
|
r1_pete
|
| posted on 20/6/11 at 07:54 AM |
|
|
Weldspek at Boughton near Ollerton will do it for you, not sure if that is close enough for you?
Weldspek
Unit 198, Road F,
Boughton Ind. Est.
Ollerton
Nottinghamshire
NG22 9LD
Contact: Dave Maddison
Telephone: 01623 835555/01
[Edited on 20/6/11 by r1_pete]
|
|
|
franky
|
| posted on 20/6/11 at 07:56 AM |
|
|
Cheers everyone. Got a few options to call now.
|
|
|
