needforspeed
|
| posted on 7/7/11 at 09:50 PM |
|
|
can anyone help identify the year of this blade engine?
as titel really after a wiring diagram!
|
|
|
|
|
wylliezx9r
|
| posted on 7/7/11 at 10:01 PM |
|
|
There should be some numbers on the engine, that would be better to identify the engine.
I spent a lot of money on booze, birds and fast cars. The rest I just squandered.
George Best
|
|
|
welderman
|
| posted on 7/7/11 at 10:16 PM |
|
|
looks like an early one, 85/86, check cc size then you will get a better answer
Thank's, Joe 
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
ReMan
|
| posted on 7/7/11 at 10:21 PM |
|
|
As said engine number, it should tell you the cc on the block
I suspect early 893 though at a guess. Is the a TPS on the carbs?, is there a sensor onto the gearbox? (Not the neutral swithch)
www.plusnine.co.uk
|
|
|
needforspeed
|
| posted on 7/7/11 at 10:23 PM |
|
|
thanks for the replys il double check tomo not even seen the motor yet just been sent some pics and asked to wire it and get it running! :-/
|
|
|
mark chandler
|
| posted on 7/7/11 at 10:23 PM |
|
|
its got a sight glass so a 918/919 which makes it 1995 ish
It will run with any early blade spark ECU, if you fit a CBR600 you can rev it a little higher.
diagram
provide power to the ECU and earth the side stand and neutral wires.
Earlier engines did not have TPS's so ignore if not fitted.
|
|
|
needforspeed
|
| posted on 8/7/11 at 08:30 PM |
|
|
thats perfect thanks!!
|
|
|
needforspeed
|
| posted on 8/7/11 at 08:31 PM |
|
|
engine code was sc33e 27485 anyway!
|
|
|
McLannahan
|
| posted on 8/7/11 at 09:03 PM |
|
|
My engine (sc33e 2xxxx) was a 1997 919cc.
|
|
|
