JeffJeffers
|
| posted on 16/7/11 at 01:22 PM |
|
|
Zetec injector rail
On the Zetec fuel rail is the fuel pipe connection closest to the cambelt the feed?
|
|
|
|
|
AndyW
|
| posted on 16/7/11 at 02:29 PM |
|
|
If its the one into the pressure regulator then Im sure it is. But Im just about to connect mine so was going to ask the same question! Im sure some
one will confirm this shortly :-)
Andy
|
|
|
JAMSTER
|
| posted on 16/7/11 at 02:34 PM |
|
|
do you have a pipe with a tyre looking valve on if so this is inlet the pipe with the fuel reg is return
|
|
|
AndyW
|
| posted on 16/7/11 at 04:14 PM |
|
|
Looks like my post above is wrong then, so ignore me.....
|
|
|
will121
|
| posted on 16/7/11 at 04:53 PM |
|
|
quote:
Originally posted by JAMSTER
do you have a pipe with a tyre looking valve on if so this is inlet the pipe with the fuel reg is return
If its silver top cast Ali one, then this Is correct
|
|
|
AndyW
|
| posted on 16/7/11 at 06:39 PM |
|
|
ok same question, for a blacktop, one end is pressure reg, other end like a tyre valve, which is feed and which is return.
thanks
andy
|
|
|
garybee
|
| posted on 16/7/11 at 08:02 PM |
|
|
The pressure regulator will always be on the return line. They can only control the pressure upstream of their position as they work by releasing
excess pressure back to return.
|
|
|
Nash
|
| posted on 16/7/11 at 08:03 PM |
|
|
All, Here is my installation the fuel feed goes to the Cam cover end and feeds the rail. The outlet of the rail feeds into the reg and the reg returns
to the swirl pot.
That endures a constant pressure on the fuel rail.
Hope that helps?
.........................Neil
It's What You Do Next That Counts.
Build It, Buy It, Drive It:
Southern Kit Car Club
|
|
|
JeffJeffers
|
| posted on 16/7/11 at 08:31 PM |
|
|
Thanks all for the help.
|
|
|
