ryanill
|
| posted on 25/7/11 at 05:40 PM |
|
|
keihin cvk carbs ( what fuel pump)
hi all
im working on a bike carb convertion. got my hands on some keihin cvk.
at the moment im using the standard pinto fuel pump but im aware that this will be to high of a pressure for the carbs. what fuel opptions do i
have?
i have heard of using a faset pump with a pressure regulator and also some rumors or using the standar pinto pump to run a feed and return to tank
systom ?
any help will be a great help
ryan
|
|
|
|
|
lotusmadandy
|
| posted on 25/7/11 at 05:46 PM |
|
|
Hi Ryan,
Your best off with a pump from a bike.
I have the same carbs on my zetec ATM and have used the
pump from the same bike(zx9r)
The carbs only need 1.5-2.0 psi to run correctly.
Andy
|
|
|
jacko
|
| posted on 25/7/11 at 05:48 PM |
|
|
For bike carbs the best fuel pump is a bike pump off say a zx9r
only use a carb pump not FI pump
|
|
|
ryanill
|
| posted on 25/7/11 at 05:52 PM |
|
|
thanks guys
forgot that opption !
are those pumps ok to bolt to the chassie some were with a line feed or will they require a fule resivour like some i have seen ?
ryan
|
|
|
jacko
|
| posted on 25/7/11 at 05:57 PM |
|
|
Bolt to chassis i have a filter before the pump and one just before the carbs
Jacko
|
|
|
ryanill
|
| posted on 25/7/11 at 07:06 PM |
|
|
sounds good to me jacko!
have to start calling round the breakers yards now 
cheers ryan
|
|
|
