neilp1
|
| posted on 5/11/11 at 09:22 AM |
|
|
15mm -8mm Reducer
Anyone know where I can get a 15mm - 8mm reducer. This is for my fuel pump it has a 15mm inlet and 8mm outlet.
Cheers in advance.
|
|
|
|
|
Dusty
|
| posted on 5/11/11 at 10:03 AM |
|
|
FSE/Sytec do brass unions of 8mm and 15mm with a 1/4NPT base. If your pump has a screwed union you're
sorted. Alternative is cheap or expensive inline fuel filter off ebay with 1/4NPT screw in ends which often come with two 8mm unions. Add one of
sytecs 15mm unions and you're sorted. You always intended to have a pump pre-filter, didn't you?
|
|
|
owelly
|
| posted on 5/11/11 at 10:35 AM |
|
|
Any pumbers or diy place should have a copper 15mm/8mm Yorkshire reducer. The beads that hold the solder stop the hoses from coming off.
http://www.ppcmag.co.uk
|
|
|
