dave107
|
| posted on 12/11/11 at 03:54 PM |
|
|
RPM calibration
Many of you have configured your digidash instruments so can any one help please.
Digidash 2 lite: at the part in configuring my dash were im'e at calibration, the title is engine RPM calibration, there is a box were i must
put a value in for the number of pulses per engine cycle from the ECU or coil pack.
My engine is a R1 2003 4 cylinder.
So is the number of pulses per engine cycle 4 as there are 4 cylinders.
|
|
|
|
|
stevebubs
|
| posted on 12/11/11 at 08:19 PM |
|
|
I believe you will find the crank will have done 720 degrees for 4 pulses....but the cam only 360....
|
|
|
