emwmarine
|
| posted on 28/5/13 at 04:19 PM |
|
|
Spigot bearings.
Te spigot bearing qouted by a Ford parts place for a Zetec by Paul's it car pages is : 1554973 and costs 27 odd quid.
There are however, sierra Pinto spigot bearings for about 8 quid. Given a type 9 plugs into both they must be fairly similar - although the OD might
be different.
Does anyone know whether a cheap pinto spigot bearing will work with my 1.8 zetec flywheel or do I have to go the hicost option?
Building a Dax Rush.
|
|
|
|
|
snapper
|
| posted on 28/5/13 at 04:46 PM |
|
|
I would suggest you measure both ( or at least find the external dimensions)
The internal size may well be the same for the gearbox input shaft nose but the external dims are specific to the crankshaft it fits into
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
snapper
|
| posted on 28/5/13 at 04:48 PM |
|
|
This thread may help you
http://viatron.websitetoolbox.com/post/Spigot-bearing-for-zetec-conversion-1511544
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
paulf
|
| posted on 28/5/13 at 05:14 PM |
|
|
There all the same , I have used sierra ones in zetecs a couple of times.Either buy from ford or from a motor factor .
Paul
|
|
|
loggyboy
|
| posted on 28/5/13 at 05:36 PM |
|
|
I paid £6 for mine:
www.ebay.co.uk/itm/QSB101-CLUTCH-SPIGOT-BEARING-FOR-VARIOUS-FORD-SEE-DESCRIPTION-/161028282758
Mistral Motorsport
|
|
|
.jpg)
