Hornet
|
| posted on 6/10/02 at 07:14 PM |
|
|
Flywheel/cluch
Hi, this could take some explaining 
I want to fit a 4 speed ford gearbox from a 1.3 escort mk 2 to a 1.6 x-flow engine.
The 1.6 flywheel is totaly different than the 1.3 one with the clutch being 9" dia compared to 7" for the 1.3
The 1.3 clutch pressure plate holes dont line up with 1.6 flywheel.. and the original 1.6 clutch plate splines are too large for the g/box.
The 1.6 flywheel is A1 condition and the 1.3 one duff.. any advice if ya can understand my ramblings
|
|
|
|
|
Hornet
|
| posted on 9/10/02 at 03:20 PM |
|
|
Thanks for the many responses 
It appears that the clutch size for a 1.1, 1.3 and 1.6 are all the same. i.e. 190mm dia.
Looks like i have an 1.6 engine from a rouge source.
PS part number for clutch from Borg & Beck is HK8145 (£65)
|
|
|
