RogerM
|
| posted on 24/3/05 at 06:34 PM |
|
|
Bellhousing for long input type 9 & 4AGE engine
In addition to my previous request
http://www.locostbuilders.co.uk/viewthread.php?tid=23851&page=1#pid194841
I was wondering if anybody knows of a bellhousing to suit a long input type 9 box and a Toyota 4AGE engine.
I have a RAW short input bellhousing should anybody have a long input bellhousing they would want to swap.
Cheers folks
|
|
|
|
|
Ben Smith
|
| posted on 24/3/05 at 10:42 PM |
|
|
Can the input shaft not be shortened or do the splines not go far enough along?
Ben.
|
|
|
RogerM
|
| posted on 25/3/05 at 12:10 PM |
|
|
Nope, can't really move the splines.
Also that would remove the main advantage of the box to me .... apprx 20mm longer which means I can get the leaver in a much better position without
having to use the naff and/or expensive extensions.
|
|
|
Ben Smith
|
| posted on 25/3/05 at 01:29 PM |
|
|
Yes, the gear shift is much better going straight into box. This is the same as on my Striker. Don't like the extensions unless there is no
alternative.
Ben.
|
|
|
