oliwb
|
| posted on 4/11/05 at 10:11 PM |
|
|
Crankcase Breather
Anyone got any suggestions what to do with a crankcase breather pipe that can't be connected to an air filter....got a Fiat X1/9 going through
MOT next week and just fitted new pipercross airfilter as old one broke....but obviously no where to fit crankcase breather now....any suggestions and
what happens about emissions etc?? Does it change anything??....Cheers Oli.
If your not living life on the edge you're taking up too much room!
|
|
|
|
|
Ben_Copeland
|
| posted on 4/11/05 at 10:39 PM |
|
|
Plumb it into the filter, or fit a separate smaller filter to the pipe.
Unsure what it would do to then emissions, probably nopt a lot.
Ben
Locost Map on Google Maps
Z20LET Astra Turbo, into a Haynes
Roadster
Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!
|
|
|
Mark Allanson
|
| posted on 4/11/05 at 11:07 PM |
|
|
The breather was bloody useless on the exxy at the best, it had a feeble attempt at a connection with the underside of the filter housing, it had a
bottle brush type of thing fitted inside to stop flame back. most usually got blown off and lost, or got thrown away!
Ideally, get a filter fitted to the end of the pipe, realistically, just bin it.
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
