mark chandler
|
| posted on 30/12/05 at 11:18 PM |
|
|
Blade mounting bolts & engine height
Hi all,
Can anyone tell me what bolts I need to attach my mounts to the blade engine.
On the LHS halfway up the cylinder block there are two tapped holes with one on the RHS.
Also with a standard sump the main pan sticks about 2" below the chassis, does this sound about right ?
Regards Mark
|
|
|
|
|
ReMan
|
| posted on 31/12/05 at 01:27 AM |
|
|
You need some fine thread bolts.
The best (cheapest?) option is to call in on a bike breaker, should have loads of them in different lengths.
Yes. You might want to consider getting the sump plug moved to one side for a bit extra clearance if you're concerned. Look at Chris Gamlins
signature.
www.plusnine.co.uk
|
|
|
the_fbi
|
| posted on 31/12/05 at 01:02 PM |
|
|
I got mine from Namrick (I think).
http://www.namrick.co.uk/browse.asp?PCID=9
|
|
|
