omega0684
|
| posted on 15/1/06 at 02:05 AM |
|
|
clutch problem?
so i took the flywheel and clutch off my pinto the other day for a bit of a closer inspection, only to find that the clutch is KNACKERED! clutch
springs: one shattered and two split in half! my knowledge of clutches is basic to say the least, with reference to makes, models and such, so i need
your help.
Where can i find and buy a clutch kit that will fit a 2.1 litre pinto engine with a type 9 gearbox? im looking for a bit of an uprated cluth as my
putting in a lightened flywheel and the engine is modded to give about 160 bhp. im hoping to get the first ratio extended in the gearbox so the clutch
must be able to handle high revs
Alex
|
|
|
|
|
gazza285
|
| posted on 15/1/06 at 02:35 AM |
|
|
Burton Power have a range of clutches to suit your needs. Find them here
Others are available though, but Burton are old Ford Specialists and have a very good reputation. They have never disappointed me over the years.
DO NOT PUT ON KNOB OR BOLLOCKS!
|
|
|
