paulf
|
| posted on 7/2/06 at 08:20 PM |
|
|
I use Corby hose and hydraulics in geddington road Corby.
I bought a meter of 38mm id rubber hose for my throttle body mountings and paid £7 for it. It is rubber but was told it would be ok for my application
, even if it degrades it is cheap enough to replace when needed. I dont believe silicon is any more petrol resistant and maybe less so than some
rubber.
Paul.
Worth a try as on your route between Peterboro and Leamington.
Paul
quote:
Originally posted by muzchap
OK HERE's the PRICES
They do 48mm Internal Diameter black pipe @ £13.80 per metre
They do 51mm Internal Diameter black pipe @ £14.30 per metre
Oh this is not Grifflex, this is Radiator Hose.
They can deliver, and minimum length is 1 metre.
Therefore if we want to buy bulk we'll need even numbers as 0.5 metres to fit them should be more than adequate.
Cheers,
Murray
[Edited on 7/2/06 by muzchap]
|
|
|
|
|
muzchap
|
| posted on 8/2/06 at 08:15 AM |
|
|
Cheers Paul :-)
Yeah used to frequent Corby, had a girlfriend there 
She used to hold up the umbrellas at motorbike races... 5ft 2, size 8 and 32DD
I constantly ask myself why did I end it? :-(
------------------------------------
If you believe you're not crazy, whilst everybody is telling you, you are - then they are definitely wrong!
------------------------------------
|
|
|
Chris_G
|
| posted on 6/3/06 at 02:30 PM |
|
|
Murray,
did you ever get this sorted? I'm about to be in exactly the same position with my GSXR T/B's. What did you end up using or is you bulk
buy idea still in limbo?
Cheers
Chris
quote:
Originally posted by muzchap
OK HERE's the PRICES
They do 48mm Internal Diameter black pipe @ £13.80 per metre
They do 51mm Internal Diameter black pipe @ £14.30 per metre
Oh this is not Grifflex, this is Radiator Hose.
They can deliver, and minimum length is 1 metre.
Therefore if we want to buy bulk we'll need even numbers as 0.5 metres to fit them should be more than adequate.
Cheers,
Murray
[Edited on 7/2/06 by muzchap]
Now finished! Xflow-Zetec swap with GSXR TB's and Megasquirt.
|
|
|
muzchap
|
| posted on 6/3/06 at 02:48 PM |
|
|
check your U2U ;-)
------------------------------------
If you believe you're not crazy, whilst everybody is telling you, you are - then they are definitely wrong!
------------------------------------
|
|
|
Volvorsport
|
| posted on 6/3/06 at 07:14 PM |
|
|
if you go round all the six cylinder 960 volvos in scrap yards , thats exactly how all the manifolds are held on , and its 2 inch .
or you can try and contact PDM hose , they were my silicone hose supplier before i switched codes
www.dbsmotorsport.co.uk
getting dirty under a bus
|
|
|
.jpg)
