chrsgrain
|
| posted on 13/2/06 at 02:02 PM |
|
|
C20XE fuel pipe question
Hi all,
couple of things... firstly which end of the fuel rail does the fuel go in to (and conversly, out of) I'vee looked everywhere and can't
find it! Also, has anyone had any success finding a fitting that screws into the fuel rail adapters - none of the local hydraulic places have them...
what have other people done??
Thanks
Chris
|
|
|
|
|
Howlor
|
| posted on 13/2/06 at 02:09 PM |
|
|
I had to get fittings from the local scappy, leaving 4" of the rubber hose as they are crimped on. I thn used copper tube for the supply and
pushed it up onto the rubber hose, jubilee clipped tight and it works a treat.
Steve
|
|
|
ned
|
| posted on 13/2/06 at 02:16 PM |
|
|
Chris,
Are you using the standard fuel system/inlet or an aftermarket/throttle bodies?
cheers,
Ned.
beware, I've got yellow skin
|
|
|
MikeRJ
|
| posted on 13/2/06 at 02:16 PM |
|
|
Assuming you are using the original Vauxhall fuel rail, fuel goes in to the end furthest from the regulator, and out from the end with the regulator.
|
|
|
chrsgrain
|
| posted on 13/2/06 at 02:18 PM |
|
|
I am using the standard system, as it will (should!) fit under the bonnet OK.... thanks for that - fuel in away from regulator.... cool!
I was hoping to get some new ends crimped onto the fuel pipe to eliminate any possibility of leaks, but having tried and tried, I might be forced to
use clips, unless there are any other good solutions.
Chris
|
|
|
