DIY Si
|
| posted on 16/2/06 at 05:45 PM |
|
|
CVH clutch guide for dummies/me
Anyone know which is the best, cheap clutch kit/plate to get an 1800 cvh to a type 9? I've got the 1800 flywheel and a spring plate, but it
came with the wrong friction plate (was the type to fit a 4 speed). I'd prefer to only beg/borrow/steal the friction plate, but can but the kit
if nessecary. Much thanks all you lovely people.
Hoping you lot are as/more affected by flattery than most!
[Edited on 16/2/06 by DIY Si]
|
|
|
|
|
DIY Si
|
| posted on 16/2/06 at 06:49 PM |
|
|
Ha Ha!! That's precisely what I'm doing
Any idea how much it would be to get it down this way, since you're all the way up near the North Pole aren't you? I'm not far
north of Oxford.
|
|
|
britishtrident
|
| posted on 16/2/06 at 08:23 PM |
|
|
1800 CVH to type 9
Standard Sierra 1800 --- your local motor factor
|
|
|
