Danozeman
|
| posted on 20/2/06 at 05:07 PM |
|
|
Zetec TPS on bike carbs.
Has anyone got any pictures of how theyv mounted a Zetec TPS to a set of bike carbs? Im after some ideas to do mine. The simpler the better.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
|
|
dave1888
|
| posted on 20/2/06 at 05:11 PM |
|
|
what carbs are you using
|
|
|
Danozeman
|
| posted on 20/2/06 at 05:13 PM |
|
|
zx9r.
[img][/img]
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
oliwb
|
| posted on 20/2/06 at 05:37 PM |
|
|
I've got some zx7r's and had to mount the tps on the bulkhead in a homemade mount and use a second cable to operate the TPS....not ideal
so if you can come up with something I'd be gratefull too! Cheers Oli.
If your not living life on the edge you're taking up too much room!
|
|
|
givemethebighammer
|
| posted on 20/2/06 at 09:19 PM |
|
|
I know it won't help you but my blackbird carbs already had the TPS attached. All I had to do was recalbrate my ECU for the honda TPS range.
They are Keihin VP carbs, the TPS fits on the end of the spindle of the carb nearest the driver. Maybe there is a way of fitting a TPS in the same
place on yours ?
|
|
|
Danozeman
|
| posted on 21/2/06 at 06:26 AM |
|
|
Thats where i want it to be but I dont know the best way to take a pivot off the throttle spindle.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
