trogdor
|
| posted on 3/4/06 at 06:47 PM |
|
|
zetec bellhousing bolt thread
Hi, i have just brought an engine stand to mount my zetec too so i can work on it safely, it nearly fell off its pallet yesterday! anyway i need to
know what the thread is of the bolts that mount the gearbox to the block?
i assume they are a metric size?
also can anyone tell me how far the holes for the bolts go into the block? i want to get the bolts in as far as possible to enable a secure
mounting.
many thanks
|
|
|
|
|
stevebubs
|
| posted on 3/4/06 at 07:35 PM |
|
|
M8 or M10....think it's the latter....
|
|
|
DIY Si
|
| posted on 3/4/06 at 08:26 PM |
|
|
knowing ford it'll be M10 or M12. Probably M10.
|
|
|
Ian D
|
| posted on 3/4/06 at 08:35 PM |
|
|
Its M10.
Ian
|
|
|
stevebubs
|
| posted on 3/4/06 at 08:43 PM |
|
|
quote:
Originally posted by DIY Si
knowing ford it'll be M10 or M12. Probably M10.
Just been out to pop a mount off, and checked the bellhousing bolts while I was there. It's definitely a 17mm spanner - so M10 it is.
[Edited on 3/4/06 by stevebubs]
|
|
|
stevec
|
| posted on 3/4/06 at 09:18 PM |
|
|
M10 1.5 mm pitch
|
|
|
