Krismc
|
| posted on 21/4/06 at 08:09 PM |
|
|
GOOD OR BAD BUY?
[img]http://i19.ebayimg.com/04/i/06/e2/38/f2_1_b.JPG[img]
i got these 2005 K5 GSXR740 TB's for £75 and the seller also has a mega squirt for £200 which she will send away with this item,
http://cgi.ebay.co.uk/MegaSquirt-for-any-Zetec-Duratec-CVH-EngineI_W0QQitemZ8058642607QQcategoryZ122139QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
my question is, is it a good price? is there any thing else ill need? wiring loom etc
and im a total novice remember!
[Edited on 21/4/06 by Krismc]
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
|
|
greggors84
|
| posted on 21/4/06 at 08:23 PM |
|
|
Seems expensive, ive seen people selling built ones that look very similar to the one in the picture for £125.
You will also need the right ford coil pack, crank sensor and the EDIS 4 module, they can be had from your scrappy for £15 together.
Chris
The Magnificent 7!
|
|
|
stevebubs
|
| posted on 21/4/06 at 09:25 PM |
|
|
If you're unsure of anything to do with it, I'd skip it and buy directly from a trusted source.
|
|
|
stevebubs
|
| posted on 21/4/06 at 09:25 PM |
|
|
If you're unsure of anything to do with it, I'd skip it and buy directly from a trusted source as you'll then get backup.
|
|
|
stevebubs
|
| posted on 21/4/06 at 09:28 PM |
|
|
For simplest wiring, my advice would be to buy a prebuilt v3 board with extra VB921 ignition driver.
|
|
|
Krismc
|
| posted on 21/4/06 at 09:28 PM |
|
|
yea i best do that...
and quote:
You will also need the right ford coil pack, crank sensor and the EDIS 4 module, they can be had from your scrappy for £15 together.
the scrap man no what a EDIS 4 MODULE is cause i dont! im guessing he knows what a crank sensor is, and which coil pack do i need!
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
stevebubs
|
| posted on 22/4/06 at 12:56 AM |
|
|
If you go for a V3 with extra VB921, then you don't need the EDIS module...
|
|
|
stevebubs
|
| posted on 22/4/06 at 12:58 AM |
|
|
But if you buy the V2.2 one... then fleabay will help...
Clicky
|
|
|
stevebubs
|
| posted on 22/4/06 at 12:58 AM |
|
|
quote:
Originally posted by Krismc
yea i best do that...
and quote:
You will also need the right ford coil pack, crank sensor and the EDIS 4 module, they can be had from your scrappy for £15 together.
the scrap man no what a EDIS 4 MODULE is cause i dont! im guessing he knows what a crank sensor is, and which coil pack do i need!
Use the zetec coil pack, and the standard crank sensor - you should have got those with your engine....
|
|
|
Krismc
|
| posted on 22/4/06 at 08:48 AM |
|
|
quote:
quote:
--------------------------------------------------------------------------------
Originally posted by Krismc
yea i best do that...
and
quote:
--------------------------------------------------------------------------------
You will also need the right ford coil pack, crank sensor and the EDIS 4 module, they can be had from your scrappy for £15 together.
--------------------------------------------------------------------------------
the scrap man no what a EDIS 4 MODULE is cause i dont! im guessing he knows what a crank sensor is, and which coil pack do i need!
--------------------------------------------------------------------------------
Use the zetec coil pack, and the standard crank sensor - you should have got those with your engine....
Got the coil pack, what does the crank sensor look like??
and what does the EDIS4 do and where is origionally from?
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
