Nissan No Go

Not logged in [Login - Register]

LocostBuilders » Forum » Engine & Transmission » Nissan No Go

Power Tools at MachineMart.co.uk

Printable Version | Subscribe | Add to Favourites

niceperson709

Senior Builder

Posts 442
Registered 8/7/04
Location SUNNY QUEENSLAND AUSTRALIA
Member Is Offline

Photo Archive Go!

Building: Locost S1 style now registered and on the road :-)

posted on 27/4/06 at 06:52 AM

Nissan No Go

I have got to the stage in my build where I want to try to start my engine . The problem is that it has to run the original ecu I have a fwd engine connected to a rwd auto transmission The original transmission was a 4 speed auto controlled by a "transmission control module".I had hoped that once the correct wires for the park /neutral switch were connected that It would turn over but so far no joy at all . I do have the correct key and The red led for the imobiliser does flash and No error code shows when turning it on . The airbag has been deployed and the warning light for that is iluminated ( I have removed the connections for remote mirrors interior lights ect but the main loom is not butchered . I do have a Almera manual on CD rom but just the electrical section is 400 pages ! any help or sugestions would be apreciated.

Best wishes IAIN
life is not the rehearsal , it's the show so don't sit there thinking about it DO IT NOW
http://iainseven.wordpress.com/

LocostBuilders » Forum » Engine & Transmission » Nissan No Go

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.