omega 24 v6
|
| posted on 13/5/06 at 10:16 AM |
|
|
XE Radiator
What radiators have youz guys used in your XE installations? Any pics?
[Edited on 13/5/06 by omega 24 v6]
|
|
|
|
|
ned
|
| posted on 13/5/06 at 10:17 AM |
|
|
polo rad, in my archive.
beware, I've got yellow skin
|
|
|
omega 24 v6
|
| posted on 13/5/06 at 10:58 AM |
|
|
Does it keep it cool enough Ned? Or are you not far enough on to know yet?
|
|
|
liam.mccaffrey
|
| posted on 13/5/06 at 11:22 AM |
|
|
i have a polo van rad, its the very one which kept lsdwebs 180 hp zetec installation cool.
I'm running ectoec though and i havn't tried it yet
Build Blog
Build Photo Album
|
|
|
ned
|
| posted on 13/5/06 at 11:54 AM |
|
|
not far enough along to know. ask me in a week once its been on the rolling road 
beware, I've got yellow skin
|
|
|
skippad
|
| posted on 13/5/06 at 11:55 AM |
|
|
i've used a alloy/plastic micra radiator on mine for last 3yrs with no problems.
In normal driving, a steady 80deg, trackdays drivin hard 85-90deg, fan cuts in at about 90deg.
Dave
|
|
|
ned
|
| posted on 13/5/06 at 04:03 PM |
|
|
your location and mounting brackets look identical to mine Calvin
beware, I've got yellow skin
|
|
|
cidersurfer
|
| posted on 13/5/06 at 05:10 PM |
|
|
Polo rad on mine too, it's been fine for cooling 213 brake! 
shimming solid lifters is a job for a friend...
|
|
|
NS Dev
|
| posted on 13/5/06 at 11:29 PM |
|
|
Polo on mine too, not run yet but its bigger than the on on my grasser and that stays cool.
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
omega 24 v6
|
| posted on 14/5/06 at 12:01 AM |
|
|
OK so Polo it is then. I'll try to get one without a hole Get it get it
I'll get my jacket.
Builds progressing well there Mark will it be on the road this summer?
|
|
|
