lee201283
|
| posted on 13/4/03 at 07:34 AM |
|
|
what engine and gearbox mounts do i use for the 1.6 zetec and type 9 box?
what engine and gearbox mounts do i use for the 1.6 zetec and type 9 box?
|
|
|
|
|
Peteff
|
| posted on 13/4/03 at 12:22 PM |
|
|
For the type 9 box do the same as everybody else and drill the rivets out of the Sierra mount and just use the centre of it, it fits the locost tunnel
spot on. You are on your own with the engine mounts but several people I have read have mounted them from the alternator bracket and gearbox
bellhousing bolts.
yours, Pete.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
zetec
|
| posted on 14/4/03 at 10:21 AM |
|
|
The are some pics on my section,worth calling MK or other locost suppliers. It is easier to mod the chassis mounting plates if they are in the wrong
place than make the mounts from scratch.
|
|
|
givemethebighammer
|
| posted on 15/4/03 at 06:14 PM |
|
|
There are some plans for Zetec mounts in my photo section, I found them somewhere on my travels through the web. Made from 3mm steel sheet and 50mm
square tube.
|
|
|
