trextr7monkey
|
| posted on 18/5/06 at 10:20 AM |
|
|
Samco Hoses fiesta and X flow
A bloke not too far away is selling a set of samco hoses bought and unused for a Mk3 Fiesta- do any hose experts know if there is much of an over lap
with the hoses used in a x flow and at about £75 is it a good buy?
Thanks in anticipation 
http://www.flickr.com/photos/14016102@N00/ (cut and paste this dodgey link)
Our most recent pics are here:
http://s129.photobucket.com/albums/p211/trextr7monkey/
|
|
|
|
|
DarrenW
|
| posted on 18/5/06 at 11:12 AM |
|
|
i would suspect that car specific kits may not be 100% useable for a kit car and to continue the theme may leave you sourcing some extras.
i got all of my hoses and ali joiners from Mac#1 and it was an awful lot more than that for Pinto without header tank.
|
|
|
Marcus
|
| posted on 18/5/06 at 01:41 PM |
|
|
Problem with Fester, it's FWD, so engine is transverse. This may make some hoses useable, as they may be longer.
Marcus
Marcus
Because kits are for girls!!
|
|
|
trextr7monkey
|
| posted on 18/5/06 at 09:54 PM |
|
|
Hmm , I gues I will have to have a look but don't wish to be accused of wasting his time!!
http://www.flickr.com/photos/14016102@N00/ (cut and paste this dodgey link)
Our most recent pics are here:
http://s129.photobucket.com/albums/p211/trextr7monkey/
|
|
|
