fellowes
|
| posted on 20/5/06 at 01:00 PM |
|
|
Zetec Spigot Bearing-Is it installed backwards
Wonder if someone can tell me if I installed my spigot bearing wrong. I insterted it chamfer end into the crankshaft. Is this the correct way? If
not, what issues do people see if I leave it this way
thanks
|
|
|
|
|
stevec
|
| posted on 20/5/06 at 01:06 PM |
|
|
Is it a needle roller? If so dont they have a little lip seal on one end which faces outwards.
Steve.
|
|
|
BKLOCO
|
| posted on 20/5/06 at 01:15 PM |
|
|
I believe that some have the seal but not all.
The one that I got from Fords didn't have it.
Experience is what you get when you don't get what you want!!! 
|
|
|
dave1888
|
| posted on 20/5/06 at 01:28 PM |
|
|
Does it really matter if it is installed the wrong way, as mine is in but i dont remember which way i installed it.
|
|
|
Danozeman
|
| posted on 20/5/06 at 01:59 PM |
|
|
Theres 2 different ones isnt there? I has a seal and one doesnt IIRC. The one without is cheaper.
It shouldnt make alot of difference which way its in aslong as the shaft still slides into it.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
Krismc
|
| posted on 20/5/06 at 04:57 PM |
|
|
i payed £8 didnt even think about that just wacked it in!
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
dave1888
|
| posted on 20/5/06 at 05:38 PM |
|
|
Im sure i paid about £8 for mine, but i went to ford to get another one a couple weeks ago they quoted me £25ish. Although they dont have any left
apparently most of the stock that is over 10 years old has been sold of to a company called Nu Ford?
|
|
|
Krismc
|
| posted on 20/5/06 at 05:48 PM |
|
|
£8 and 50p delivery from tiger
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
.jpg)
