shades
|
| posted on 23/5/06 at 09:12 PM |
|
|
4age pressure gauge sender supplier?
Are there any suppliers for pressure gauge senders? I need one for my 4age. I did get one in my avon kit but the thread appears to be slightly
different. seems to be an M10 but with a 27 thread?
Any suggestions?
|
|
|
|
|
shades
|
| posted on 23/5/06 at 10:48 PM |
|
|
think I have answered my own question... I need a M10x1 female to 1/8" NPT male adaptor... Demon tweaks do them... Ta anyway
|
|
|
rusty
|
| posted on 24/5/06 at 07:16 AM |
|
|
the 4age block where the original oil pressure sender fits is NOT 1/8 NPT 27 it is 1/8 BSPT 28.
Just in case you don't know BSPT is a parrallel thread and NPT is tapered. I just rethreaded my new sender with the small side of a 1/8 NPT 27
dis so in affect it became 1/8 27tpi parrallel thread.
|
|
|
shades
|
| posted on 24/5/06 at 05:04 PM |
|
|
Thanks rusty,
Thought i had it sussed last night, but was back in garage scratching head again...
Still dont understand the differece between a 27 and 28 thread. Surly if I rea thread the 27 to be parallel it will still be a 27 thread? or is the
difference so small it not make much difference?
|
|
|
