shades
|
| posted on 5/6/06 at 07:34 PM |
|
|
How many Torques do I need?
I am bolting my type 9 gearbox to the 4age bell housing... How tight do I make the 4 cap head bolts?
Any help gratefully recieved as engine almost back in 
|
|
|
|
|
Chippy
|
| posted on 5/6/06 at 10:30 PM |
|
|
Hi, the Haynes book of errors states that the "Clutch housing to gearbox bolts", should be 70 to 90 Nm, or in old money 52 to 66 lbs ft.
Hope that helps. atb Chippy.
PS. Don't foreget to put some thread lock on the bolts.
[Edited on 5-6-06 by Chippy]
|
|
|
britishtrident
|
| posted on 6/6/06 at 07:01 AM |
|
|
Really no need to torque them just a fairly heavy pull on a standard 1/2" socket ratchet handle will be just fine.
|
|
|
shades
|
| posted on 6/6/06 at 10:57 PM |
|
|
thanks guys...
|
|
|
