mad4x4
|
| posted on 18/6/06 at 08:41 PM |
|
|
What length is yours
Zetec Crank posotion sensors.
Are they all the same length?
I have and 1.8 zetec engine that came out of a automatic and I can't get it to spark. I suspect that the Crank Position Sensor (CPS) is to
short.
I have tried one out of a mates 1.8 and it's not working either.
Is the 2 liter one longer ?
Is there a difference in this sensor and the fly wheel on the 2 liter?
I suspect I may have a 2liter flywheel? but only guessing?
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
|
|
|
big_wasa
|
| posted on 18/6/06 at 08:49 PM |
|
|
See Link
I think you will find its this.
[Edited on 18/6/06 by big_wasa]
|
|
|
mad4x4
|
| posted on 18/6/06 at 09:12 PM |
|
|
Cheers I have the Automatic One : bummer 
[Edited on 18/606/06 by mad4x4]
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
|
phoenix70
|
| posted on 18/6/06 at 10:09 PM |
|
|
Still on Schedule for your SVA on the 29th?
Got my re-test the same day at Aberdeen so might see you there
Cheers
Scott
|
|
|
mad4x4
|
| posted on 20/6/06 at 07:24 PM |
|
|
Part number for the correct Zetec CPS mounting bush is
Manual :
Ford Part 1663863 @ £3.49
As for the test on 29th ----- not sure.... this is just another set back. I'll decide on Moday morning next week.
[Edited on 20/606/06 by mad4x4]
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
|
