donut
|
| posted on 19/7/06 at 03:33 PM |
|
|
Mixture screw
Sorry to be a thicky but where is the mixture screw on a 28/32 webber downdraft carb? Lots of screws, dunno which is correct.
ta
Andy
When I die, I want to go peacefully like my Grandfather did, in his sleep -- not screaming, like the passengers in his car.
http://www.flickr.com/photos/andywest1/
|
|
|
|
|
Confused but excited.
|
| posted on 19/7/06 at 04:17 PM |
|
|
Not sure if this is what you want, but on a 32/36 the fast idle screw is the cheese head one with a spring under the head just behind the choke
housing, the slow idle screw is the one with a large milled head which bears on the throttle linkage and the CO screw is the one in the boss angled
out of the carb body base flange.
I assume the 28/32 is similar, just smaller throats. I hope this is not a bum steer and I am not totally wrong.
[Edited on 19/7/06 by Confused but excited.]
Tell them about the bent treacle edges!
|
|
|
Deckman001
|
| posted on 19/7/06 at 08:57 PM |
|
|
I'll drop the sierra manual round in the morning, I think I borrowed it from you anyway 
|
|
|
