Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: speed calculation - My brain hurts!!!!!
RobBrown

posted on 23/8/06 at 09:27 PM Reply With Quote
speed calculation - My brain hurts!!!!!

I am trying to put together a spreadsheet that details roughly what speed I should be doing in each of the 5 gears, at different revs, so I can make sure the speedo is reading roughly correct before SVA, but the numbers don't look right.

I wondered whether someone elso could sort me out:

1st Gear ratio is 3.65:1
Diff Ratio is 3.92
Wheel size is 195/15/45 which equates to 1.748 metre circumference (distance travelled for each revolution)

This is where I get confused.

If the engine is running at 1000rpm, thats 60000 revs per hour

In that hour the prop will rotate 3.65 x 60000 = 219000 times

The wheels will rotate 219000 x 3.92 = 858480 times, at 1.748 metres a time thats 1500865.131 metres

divide by 1609.344 metres in a mile

Equates to 932.5943561 MPH

Even I know that's not right.

Where have I been stupid????

View User's Profile View All Posts By User U2U Member
David Jenkins

posted on 23/8/06 at 09:32 PM Reply With Quote
You need to divide, not multiply!

60000 / 3.65 = 16438 approx

16438 / 3.92 = 4193

4193 x 1.748 = 7330

divide that by 1609 = 4.56mph
(most of the sums rounded very roughly due to laziness.)

David



[Edited on 23/8/06 by David Jenkins]

[Edited on 23/8/06 by David Jenkins]






View User's Profile Visit User's Homepage View All Posts By User U2U Member
Peter M

posted on 23/8/06 at 09:37 PM Reply With Quote
gear/speed calculator





my previous cars




my westfield build

View User's Profile E-Mail User View All Posts By User U2U Member
martthefridgeman

posted on 23/8/06 at 09:39 PM Reply With Quote
try quaife.com (quaife usa website) look in downloads, there is an excellent program for calculating speeds/ gear ratios. mja
View User's Profile E-Mail User View All Posts By User U2U Member
RobBrown

posted on 24/8/06 at 08:41 AM Reply With Quote
Thanks,
I'm pretty sure I went the divide route, but numbers still didn't look right.

OK now

View User's Profile View All Posts By User U2U Member
jonbeedle

posted on 24/8/06 at 09:03 AM Reply With Quote
I did the calculation (See Dave Jenkins' post above) then took my car to a disused airfield and checked it against my GPS and made the necessary adjustments. It was spot on at SVA. If you're planning to drive it to your SVA you could do the GPS comparison on the way.
Cheers
Jon





"Everyone is entitled to an opinion however stupid!"

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
caber

posted on 24/8/06 at 11:32 AM Reply With Quote
Found this exel sheet somewhere on the net.

Caber

View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.