roadboy
|
| posted on 10/9/06 at 05:12 PM |
|
|
Blacktop installation
I am interested in how people have installed the Blacktop Zetec to get the water pump running in the right rotation & mount the alternator. The
problem seems to be fitting an idler pulley but still retaining the belt guards, which are essential if you run into a gravel trap. Any pics would be
a great help.
Chers
Ian
Jude Performance Services
|
|
|
|
|
Project7
|
| posted on 10/9/06 at 06:05 PM |
|
|
This is the best picture i have of how i did it - the green lines represent the belt.
Image deleted by owner
[Edited on 10/9/06 by Project7]
|
|
|
stevebubs
|
| posted on 10/9/06 at 06:25 PM |
|
|
Loads of good info here..
http://boardroom.wscc.co.uk/cgi-bin/ikonboard.cgi?act=ST;f=3;t=32834
[Edited on 10/9/06 by stevebubs]
|
|
|
roadboy
|
 posted on 10/9/06 at 08:16 PM |
|
|
Thanks for the help guys, gives me food for thought, I have some old idler pulleys which I can probably utilise to make up an instalation.
Cheers
Ian
Jude Performance Services
|
|
|
