fideel109
|
| posted on 12/9/06 at 07:25 PM |
|
|
Alpha Weber
I'm from Belgium and I'm building a Tiger Avon with a Zetec 1.8 (115 bhp-build 2004). I want to buy an Alpha Weber gold kit, but which is
the right ordernumber for this type of engine?
Do you get value for money, does anyone has some experience with this system?
Thanks
JP
|
|
|
|
|
rjs
|
| posted on 12/9/06 at 07:47 PM |
|
|
Have a look on webcons site .
www.webcon.co.uk
I have 45webers on my zetac with alpha setup.
Ive had no problems & easy to fit . only thing i know of is i believe it can only be set up by alpha dealers.
K99010 Gold Kit - Ford Zetec 1.8 16v £1,650.00
K40023 Gold Kit - Ford Zetec 1.8 16v (130bhp O,E T/Body) £856.25
|
|
|
fideel109
|
| posted on 12/9/06 at 08:09 PM |
|
|
quote:
Originally posted by rjs
Have a look on webcons site .
www.webcon.co.uk
I have 45webers on my zetac with alpha setup.
Ive had no problems & easy to fit . only thing i know of is i believe it can only be set up by alpha dealers.
K99010 Gold Kit - Ford Zetec 1.8 16v £1,650.00
K40023 Gold Kit - Ford Zetec 1.8 16v (130bhp O,E T/Body) £856.25
Thanks for the answer.
I believe it's an Evo3 engine, but I don't find the exact partnumber for the right kit????
grt,
JP
|
|
|
rjs
|
| posted on 12/9/06 at 08:15 PM |
|
|
Give them a ring , numbers on web site quite helpfull on the phone
|
|
|
Dusty
|
| posted on 12/9/06 at 09:20 PM |
|
|
Try Retro Ford who will do you jenvey throttle bodies, air horns, throttle cable and pot, fuel rail,
manifold and emerald ECU for £1450 and you can play with it on your computer. Far better value than webber alpha.
[Edited on 12/9/06 by Dusty]
|
|
|
Schrodinger
|
| posted on 13/9/06 at 09:53 AM |
|
|
I would second Dusty and go for the Emerald/Jenvy option.
Emerald are also very good at helping out with problems if you run into them.
Read Dave Walker in PPC, he is part of Emerald.
|
|
|
se7ensport
|
| posted on 14/9/06 at 01:56 PM |
|
|
Yeah i'd pass on the alpha unless you have a dealer nearby, they don't give out the software so any changes to engine spec and it needs to
go to an authorised dealer with their software (I have one and looking at changing for an omex).
|
|
|
