PeterW
|
| posted on 17/10/06 at 08:26 AM |
|
|
Pinto Single DCOE Manifold
Morning All...
I have a donor with a 1.6 pinto engine, and I want to replace the DGAV carb with a DCOE so I don't have to cut the top of the bonnet.
The reason for doing this is... Initially, this is to go through the SVA as a standard 1.6 Sierra based Tiger, and then post SVA it will probably get
a new 2L lump when time and funds allow.
I know Lynx do a crossover single DCOE manifold, but I cant seem to find anyone else who does Pinto singles for love nor money...
Anyone a) got one...
b) know where to get one...?
Cheers
Pete
|
|
|
|
|
NS Dev
|
| posted on 17/10/06 at 08:32 AM |
|
|
here's your man:
Dave Brooks does em for road rally cars, give him a call on 01270 661850
http://www.davebrooks-engines.co.uk/
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
jacko
|
| posted on 17/10/06 at 03:26 PM |
|
|
Hi have you thought about bike carbs at all ? there the in thing at the moment r1- zx9r - etc Jacko
|
|
|
NS Dev
|
| posted on 17/10/06 at 03:35 PM |
|
|
not saying it'll make better power, but there's a lot to be said for the single weber lynx manifold, makes awesome low down torque, used
one on a road rally car in the past where you can only use 2 chokes of induction, and they grunt like crazy!
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
iceman26
|
| posted on 17/10/06 at 05:30 PM |
|
|
i have 2 new single lynx pinto manifolds if you are intrested let me know
|
|
|
