madteg
|
| posted on 21/10/06 at 08:08 PM |
|
|
1.6 zetec manifold
will a 1.6 inlet manifold for dcoes fit on a 2.0 engine
|
|
|
|
|
zilspeed
|
| posted on 21/10/06 at 08:52 PM |
|
|
Don't know - but it works the other way round. That's a definite, or it was with Burton manifold about 8 years or so ago.
|
|
|
ecosse
|
| posted on 22/10/06 at 09:21 AM |
|
|
It will fit on a 1.8 engine (I know because it's what i'm using ) if that helps any?
Cheers
Alex
I think the port size on the 1.6 manifold is slightly smaller, but if you need to know for sure let me know and i'll measure it for you
[Edited on 22/10/06 by ecosse]
John: I take it you know your avatar is upside down? Any particular reason
[Edited on 22/10/06 by ecosse]
|
|
|
zilspeed
|
| posted on 22/10/06 at 10:00 AM |
|
|
Well, Mark allanson decided to go with sideways, so I figured I would go one better....
|
|
|
ecosse
|
| posted on 22/10/06 at 01:59 PM |
|
|
quote:
Originally posted by zilspeed
Well, Mark allanson decided to go with sideways, so I figured I would go one better....
LOL...okay, so long as it is for good reason
|
|
|
ChrisW
|
| posted on 23/10/06 at 01:36 PM |
|
|
Yes, it will. Use the 2.0 throttle body though (needs a little tweak with a grinder, but otherwise goes straight on) and the beige 2.0 injectors (fit
straight on to the 1.6 fuel rail).
Chris
|
|
|
