myeates
|
| posted on 25/11/06 at 11:16 AM |
|
|
is the weber 32/36 too big for 1.3 crossflow
hi all just been told the above carb is too big for a 1.3 crossflow is that right can it be jetted down the engine is not tuned at the moment
please help
regards
|
|
|
|
|
graememk
|
| posted on 25/11/06 at 11:23 AM |
|
|
my uncle used to run twin 45's on his 1.3 xflow stock car.....
|
|
|
myeates
|
| posted on 25/11/06 at 11:51 AM |
|
|
thats what i thought the engine is not tuned was hoping it will run better with this carb.
does anyone know what jet i will need or should a weber specialist be able to help
thanks all
|
|
|
UncleFista
|
| posted on 25/11/06 at 12:05 PM |
|
|
Dunno what jets you'd need, but here's the jet settings for a Pinto and Crossflow 1.6;
1.6 Crossflow
Primary Secondary
Main jet 120 115
Air correction 160 120
Emulsion tube F50 F50
Idle jet 45 45
Pump jet 45
needle valve 200
1.6 Pinto
Primary Secondary
Main jet 140 135
Air correction 165 160
Emulsion tube F50 F6
Idle jet 55 50
Pump jet 50
needle valve 200
Can't remember where I found 'em, but hopefully they'll be of some use...
Tony Bond / UncleFista
Love is like a snowmobile, speeding across the frozen tundra.
Which suddenly flips, pinning you underneath.
At night the ice-weasels come...
|
|
|
stevebubs
|
| posted on 25/11/06 at 01:46 PM |
|
|
quote:
Originally posted by myeates
hi all just been told the above carb is too big for a 1.3 crossflow is that right can it be jetted down the engine is not tuned at the moment
please help
regards
Worked fine on mine...as did twin 40s...
|
|
|
myeates
|
| posted on 25/11/06 at 02:45 PM |
|
|
thats great thanks all thats a relief just need to find the right jet out if anyone knows of anyone that may know i would be very greatfull
|
|
|
Confused but excited.
|
| posted on 25/11/06 at 04:29 PM |
|
|
Give Webcon a call. I found them very helpful.
Tell them about the bent treacle edges!
|
|
|
myeates
|
| posted on 26/11/06 at 08:24 AM |
|
|
i will first thing monday thanks all
|
|
|
myeates
|
| posted on 27/11/06 at 11:11 AM |
|
|
just called webcon and they were very helpful my carb is not a 32/36 its a dgav 32 the guy who sold me it got it wrong so anybody know sizes etc for a
DGAV 32
regards
mark
[Edited on 27/11/06 by myeates]
|
|
|
