Shamrock GS
|
| posted on 20/1/07 at 06:18 PM |
|
|
Twin webber cables advice needed
I have a Capri pedal box and twin webbers.
Can anyone help me with advice or better still a pic on how to make up a cable that starts with a single at the the pedal and splits in two for the
carbs?
Thanks
Gary
|
|
|
|
|
John Bonnett
|
| posted on 20/1/07 at 07:12 PM |
|
|
Hi Gary
I used a Cortina pedal box on the Special running twin Webers. I fitted a block to the top of the accelerator pedal to take the two cables which ran
back to the box. I believe Rally Design supply similar blocks. Can you do the same? If so, it will save having a cable junction with compensator.
Best wishes
John
|
|
|
jacko
|
| posted on 20/1/07 at 07:23 PM |
|
|
Hi on some push bikes they have cables that go from 1 to 2 cables on the brakes this may help you
Jacko
|
|
|
thunderace
|
| posted on 20/1/07 at 07:47 PM |
|
|
you can buy a kit on ebay.
Item number: 150051757731
and
Item number: 8033979149
hope this helps
|
|
|
zetec7
|
| posted on 20/1/07 at 08:23 PM |
|
|
A lot of older Yamaha dirt bikes (any of the Autolube 2-strokes) had a neat 1-into-2 cable setup that might work very well. Eg.: '70's
and '80's Yamaha DT250, and many others.
http://www.freewebs.com/zetec7/
|
|
|
Shamrock GS
|
| posted on 22/1/07 at 08:37 PM |
|
|
Thanks folks - got what I needed!
Cheers
Gary
|
|
|
