CraigJ
|
| posted on 24/2/07 at 12:43 PM |
|
|
Impreza engine
Is there any 7 style car out there that has one fitted? Im going through a long list of engine choices and im very interested in fitting something
jap. Ive seen a few conversations on the impreza engine but not seen one or heard of one being fitted.
i know its a wide lump but how wide? and what gear box can be fitted to it?
|
|
|
|
|
CraigJ
|
| posted on 24/2/07 at 12:46 PM |
|
|
will it put all the power to the rear or will it still be split?
I know engines but still learning gearbox's.
[Edited on 24/2/07 by CraigJ]
|
|
|
whitestu
|
| posted on 24/2/07 at 12:54 PM |
|
|
I should think a flat four would stick out further than the side panels.
stu
|
|
|
CraigJ
|
| posted on 24/2/07 at 12:56 PM |
|
|
im aware the engine is wider, im trying to fine the dimensions of the engine and also the width of the new haynes chassis.
|
|
|
Marlon
|
| posted on 24/2/07 at 12:56 PM |
|
|
Twos covered not long since, check out this thread for more info!
http://www.locostbuilders.co.uk/viewthread.php?tid=60035
hth.
john.
Band Anyone?
Linky to SWMBO 's band
Linky to Brother in laws band
MKoc 1081
|
|
|
FlansS14
|
| posted on 24/2/07 at 07:13 PM |
|
|
it won't fit.. i looked into putting one in a clio 
if you want an easy jap convo go for the 200sx s13. loads off people to help you on that.
BUT why do you wanna go jap.... i only went for big power but if i could go back now i would definatly fit an 1.8 20V turbo in there now someone does
the bellhousing to mt75...
Why didn't i just make it simple!
|
|
|
JoelP
|
| posted on 24/2/07 at 08:25 PM |
|
|
jap you say? I would suggest something light with a 12k rev limit. 
|
|
|
.jpg)
