CairB
|
| posted on 27/2/07 at 01:02 PM |
|
|
SS mandrel exhaust bends near Manchester
Anyone any suggestions for stainless mandrel exhaust bends near Manchester, preferrably with stock / short lead time?
I'm looking for grade 304 1.875 (preferred) 1.75 & 2in OD.
[Edited on 27/2/07 by CairB]
|
|
|
|
|
welderman
|
| posted on 27/2/07 at 01:06 PM |
|
|
how far from Chorley are you ?.
Thank's, Joe 
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
Agriv8
|
| posted on 27/2/07 at 01:15 PM |
|
|
not sure about the stock or the short suplly I know MNR have 2" Mandrell bender.
they are not too far away
Regards
Agriv8
[Edited on 27/2/07 by Agriv8]
Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a
tree full of a*seholes .............
|
|
|
CairB
|
| posted on 27/2/07 at 01:29 PM |
|
|
quote:
Originally posted by welderman
how far from Chorley are you ?.
Not far, anyone in mind?
|
|
|
carlgeldard
|
| posted on 27/2/07 at 01:30 PM |
|
|
I'm going to use this place
Carl
|
|
|
daviep
|
| posted on 27/2/07 at 05:15 PM |
|
|
I spoke to THESE guys on the phone and they were very helpful. Fairly local to you I think.
THESE chaps were also very friendly on the phone.
These were'nt the cheapest but cheaper places don't stock 1.75" try HERE, this
was the cheapest but they don't list 1.75" but they may have it .
Regards
Davie
|
|
|
CairB
|
| posted on 28/2/07 at 05:21 PM |
|
|
Thanks for the links, I was aware of them, I was just looking for somewhere closer to home.
Cheers,
Colin
|
|
|
