Danozeman
|
| posted on 13/8/09 at 05:17 PM |
|
|
Zetec'ers with lightened flywheels again!!
Iv got a tiger lightened flywheel. What clutch have you used?? My standard 1.8 mondeo one wont fit??
Need it done asap..
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
|
|
prelude1980
|
| posted on 13/8/09 at 05:24 PM |
|
|
Early mondeo Mk1 220mm clutch kit with a ford capri Mk1 thrust bearing
Speed has never killed anyone. Suddenly becoming stationary... that's what
gets you.
https://www.topcashback.co.uk/ref/dodd1980
|
|
|
prelude1980
|
| posted on 13/8/09 at 05:29 PM |
|
|
sorry i didn't read that properly, i have a 1.8 litre flywheel on a 2 litre engine which is lightened but not sure on the tiger one
Speed has never killed anyone. Suddenly becoming stationary... that's what
gets you.
https://www.topcashback.co.uk/ref/dodd1980
|
|
|
cliftyhanger
|
| posted on 13/8/09 at 05:50 PM |
|
|
I have a Dunnel flywheel, I was told that the clutch was a pinto one when I got it. That could be a red herring though.
May be worth asking the manufacturer?
|
|
|
andy350z
|
| posted on 13/8/09 at 05:59 PM |
|
|
The tiger flywheel uses a pinto clutch and starter
|
|
|
Danozeman
|
| posted on 13/8/09 at 06:14 PM |
|
|
2 litre pinto?
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
madteg
|
| posted on 13/8/09 at 06:47 PM |
|
|
If you measure between centre of the dowls and let me know what you get, i will compare it with the pinto pressure plate i have in the garage.
|
|
|
andy350z
|
| posted on 13/8/09 at 07:05 PM |
|
|
Think it is 2ltr. Ordered mine all at once from Tiger.
|
|
|
andy350z
|
| posted on 13/8/09 at 08:03 PM |
|
|
See http://www.zetec-cat.co.uk/ for more info
|
|
|
Danozeman
|
| posted on 14/8/09 at 09:07 PM |
|
|
Thanks lads iv sorted it now.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
