big-vee-twin
|
| posted on 5/11/09 at 07:15 PM |
|
|
Type 9 5 Speed Help
Can anyone give me a bit of guidance on how to change the front oil seal, I have bought a seal kit to change the rear one out and just thought if its
straight forward would do the front also at the same time.
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
|
|
stevec
|
| posted on 5/11/09 at 07:28 PM |
|
|
Just remove the three bolts from the front housing and slide it off. The seal is in the housing. Change the cork gasket aswell.
Steve
|
|
|
blakep82
|
| posted on 5/11/09 at 08:46 PM |
|
|
yep, take the 3 bolts out so the trumpet thing comes off the input shaft, hook the old seal out, and press the new one in
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
big-vee-twin
|
| posted on 5/11/09 at 09:07 PM |
|
|
thank you 
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
