zzr1100rick
|
| posted on 11/2/06 at 02:37 PM |
|
|
20 Zetec clutch / type 9
I have done a search for what componants to use to fit my box to a 20 zetec and most seem to use a plate from a sierra 18 cvh which is 215mm and an 18
zetec cover which is 220mm
my zetec is running 240 mm disc
is there a reason for not using the mondeo clutch cover and plate as the splines are both 25.4 x 23
hope this makes sence
whats the betting iv missed the obviouse
|
|
|
|
|
piddy
|
| posted on 11/2/06 at 02:41 PM |
|
|
I think the answer is, most changed from 2.0 flywheel (Very heavy) to 1.8 flywheel
and the 2.0 clutch doesn't fit the 1.8 flywheel.
|
|
|
zzr1100rick
|
| posted on 11/2/06 at 02:56 PM |
|
|
so if they use the 18 zetec flywheel why dont they use the 18 zetec plate that goes with the flywheel
|
|
|
Danozeman
|
| posted on 11/2/06 at 03:59 PM |
|
|
Have a look here mate.
I asked a similar question. Best bet is to get a 1.8 zetec flywheel and use a 1.8 zetec clutch,.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
